​How to install end fittings on DuraFlex drain cable

29th Apr 2022

Duracable’s EZ-Lock tools, along with your drill, make it easy to install end fittings on any size and type of drain cable. No welding, and no pliers needed!

1.Anchor cable and in a vise with at least one inch extended.

2.Center punch the end of the cable to spread the first ring so that the threads catch more easily.

3.Put the appropriate size EZ-Lock tool in your drill.

4.Put the end fitting into the EZ-Lock tool.

5.Apply Loctite primer then retaining compound.

6.Power the end fitting into the cable.

Within seconds your end fitting is installed. That was easy!

Some helpful hints:

  • Ensure a clean cut on the cable end, and remove any burrs with a grinding disc or file.
  • Spray Loctite primer in and around the cable end and on the end fitting to thoroughly remove grease and grime.
  • Installation without the EZ-Lock system can be accomplished with our wrench #EW by manually screwing the fitting into the cable end.

Prefer to watch a video? Check it out here: 

Duracable Manufacturing provides specialty tools for installing end fittings on drain cable.

The EZ-Lock kit #EZ02 comes in a handy vinyl pouch with a Velcro closure and includes Loctite primer #21347, Loctite retaining compound #68015, and four EZ-Lock tools including:

  • Large hex socket tool #EZT002 for installing male and female end fittings in 11/16” and ¾” cables.
  • Medium hex socket tool #EZT003 for installing male end fittings in ½” and 5/8” cables
  • Small hex socket tool #EZT004 for installing male end fittings in 3/8” and 5/16” cables
  • Slip joint tool #EZT001 with unique outer spring-loaded guide that holds the slip joint in place during installation.

EZ-Lock Kit #EZ03 includes the above hex socket tools but no Loctite items.

Use Loctite when you install end fittings and splice cores to help prevent slippage.

Male, female or slip-joint style end fitting are available on your cable ends when you place your order with Duracable Manufacturing. Follow these instructions if you did not order ends on your cable, or if you need to change ends on your cable.

!